• IMPORTANCE NOTICE FOR ALL VISITORS
  • info@ansiindia.com

+91-11-49121975

What are different kinds/types of stone finishes?

The different types of stone finishes include:

Natural Cleft

Natural Cleft Unique to slate & sandstones, it has a slightly uneven surface that is still usable for flooring. This finish cannot be created, but occurs naturally as the layers are quarried. One side (back side) can be gauged to facilitate ease of "thin set" installation. Some marbles, granites and limestones are available with heavy clefting, suitable for wall installations or paving purposes only.

Ansi Image

Polished

Grinding, sanding, and buffing produces a high gloss, mirror-like surface. Polishing can be done only on crystallized stones. A polished finish doesn't affect the porosity of the stone. A polished finish is quite popular as it enhances the color and markings of the material. A stone with a polished finish is very smooth and reflective. This type of finish is used in reception areas, where marble, granite and some harder limestones are laid. The most popular uses of polished stone are in; interior and exterior wall cladding, Interior and exterior paving, Fireplace facing and hearth, Lavatory tops, Residential & Commercial counter tops, Table Tops etc. A high gloss and reflective surface finish that brings out the colors in the stone. The polishing of natural stone follows the same process as honing using finer abrasives. The degree of polish of the natural stone is determined by its mineral elements and texture and not all natural stones can be polished. Usually recommended for wall covering, polished stones are not usually recommended as stone flooring due to their low slip resistance value.

Ansi Image

Honed

Grinding and sanding produces a smooth, yet not glossy finish. This is best for low maintenance, high traffic applications. Honed finishes unlike polished finishes are not reflective. The honed finish is a satin smooth surface with little light reflection.

This finish is often used on walking surfaces and other areas where heavy traffic would wear off a polished finish. Honed finishes are used in interior wall covering. It can also used on the exterior in warm environments, table tops, very light duty residential flooring, etc. A smooth matt to light shine surface finish (depending on the stone). Created using different grades of abrasives under factory conditions, honed stone is the most commonly used and recommended internal floor finish.

Ansi Image

Flamed

A flamed finish is one of the most popular finishes for external use where slip resistance is a concern. It is produced by applying a high-temperature flame to the surface of the stone which creates thermal shock and causes the inherent crystals to fracture, resulting in deeply textured surface ideal for external surfaces. This finish is mainly used on granites, and will hide surface imperfections and tone variations. In stone with yellow shading such as Honey Jasper it oxidizes the iron components and enriches the yellow to making it pale orange/pink, this create a rich, dramatic effect in originally quiet colors.

Ansi Image

Sandblasted

This is a rough, but tidy look created by applying a high pressure blast of sand to the stone's surface. A sandblasted finish creates a finely textured surface ideal for use in traffic-ways. Applying a high-pressure jet of water mixed with sand, this treatment softens the color and characteristics of the original stone.

Ansi Image

Leather Finish

Available only in some varieties of marble & granite, this finish gives the stone a suede look and feel. This texture is smooth and slip-resistant.

Ansi Image

Split Face

Mainly used for cladding, this is achieved by splitting stone either by hand or by machine so that the surface exhibits a natural quarry texture. It has a flat back and uneven front surface, and creates the uneven look of protruding bricks. The surface evenness varies with the stone and not all stones can be obtained in split face finish.

Ansi Image

Veneer Stone

Any stone used as a decorative facing material as wall cladding which is not meant to be load-bearing. Veneer may be made from different finishes, such as split face, cleft, honed, polished, flamed or tumbled.

Ansi Image

Antiqued

This stone is tumbled with sand, pebbles etc to create a weathered, aged finish. An antique finish gives stone an aged appearance by replicating use and wear. Tumbling & at times acid wash is applied to surface of the stone which etches the surface of the stone. This generally dulls the color of the stone. The surface is then be brushed with mechanical wire bush to make the stone smooth and slightly restore the color.

Ansi Image

How can we help you?

Packaging Type

We brings 41 years of interior designs,,,,

Contact Us

We brings 41 years of interior designs,,,,

Natural Stone Care

We brings 41 years of interior designs,,,,

How to Order

We brings 41 years of interior designs,,,,

General Instruction

We brings 41 years of interior designs,,,,

Disclaimer

We brings 41 years of interior designs,,,,

Stone Tile Patterns

We brings 41 years of interior designs,,,,

Literature

We brings 41 years of interior designs,,,,

We at Associated Natural Stones ( ANSI India ) strive hard to provide our clients with quality, innovative natural stone products that try to bring little change to your life & bring you closer to the Mother Earth.